Skana Heavy Truck & Commerical Vehicle 2 in 1 Starting (Cranking) Lithium Battery
Product Features:
- Heavy duty 12V diesel battery ideal for semi trucks, heavy-duty trucks, dump trucks, yellow iron equipment, and other diesel-powered vehicles
- 5-year full replacement warranty
- 2-4x overall service life compared to lead-acid and AGM batteries
- Built-in heater to ensure charging and operation even in the coldest conditions
- Half the weight of traditional lead-acid batteries – only 30lbs (13.5kg)
- 1 LiFePO4 battery can replace multiple batteries (typically 2 lead-acid batteries)
- Reliable cranking power 2,400 in cold weather conditions
- Easy, drop-in replacement installation
- Built-in Jump Starter: Activate the Emergency Start feature by pressing a button or utilizing the App via your smartphone
- Battery auto-shutoff after detecting low voltage draw after some time, no dead battery anymore
- Advanced built-in Battery Management System (BMS)
- Cell balancing plus over voltage/short-circuit/low voltage protection
- Monitor your battery status via Bluetooth technology
- Emergency reserve energy at 12% capacity in Summer and 25% in Winter
- Environmentally safer and non-toxic
- Uses the same posts as a traditional lead-acid battery, for easy installation
- Type 31 group dimension
- Can pair with lead-acid or AGM battery if needed
Product Functions:
- Starter function provides high instantaneous current (several thousand amps) when starting the engine.
- eAPU function powers cabin heating, cooling, and other power loads can be used when the truck is parked and the engine is off. Electric flying wing, electric tail plate, and electric tarp can also be used.
- Bluetooth phone connectivity via mobile app makes it easy to monitor battery status, and cycles, identify the charging and discharging state of the battery, and diagnose whether faults are vehicle or battery-related. For example, if there is no charging current after starting, you can check weather the line contact is good or the generator is working.
- BMS products against over-charge, over-discharge, over-current, short circuit and over-temperature to effecively prevent damage to the vehicle, and automatically saves a minimum reserve of electricity for engine starting power.
- SmartStart 100 batteries can be connected in series for longer eAPU run time. For higher voltage systems. 24V and 48V product line sare also available upon request.
Specification:
Model | SmartStart 100 |
Applicable Voltage Platform | 12V |
Cell Type (cells are certified to UL1962/UL1973/UL9540) | LiFePO4 |
Cell Capacity | 100Ah |
Series-parallel Configuration | 1P4S |
Energy Capacity | 1.28kWh |
Operating Voltage Range | 10V-14V |
Maximum Continous Charging Current | 100A |
Charging Voltage Upper Limit | 14.6V |
Maximum Continous Discharge Current | 150A |
Maximum Starting Current | 2400A |
Operating Temperature | -40°F - 149°F |
Storage Temperature | -4°F - 140°F |
Operating Humidity | 0~90% ± 5%R.H. |
System Static Power Consumption | ≤ 5mA |
Communication | CAN / Bluetooth |
Upgrade Method | CAN / App |
Ingression Protection | IP67 |
Weight | 13.5 ± 0.5kg |