Works with smart alternators
Engine-running detection controls when charging starts and stops. Configurable input limits help manage alternator load, including in vehicles with Euro 5 and Euro 6 smart alternators.
Configurable 12V / 24V DC/DC charging · ORI242417040
VICTRON ENERGY ORION XS 1400
VICTRON ENERGY ORION XS 1400
Engine-running detection controls when charging starts and stops. Configurable input limits help manage alternator load, including in vehicles with Euro 5 and Euro 6 smart alternators.
Choose from eight presets for lithium, AGM, Gel and flooded batteries, or customize charging settings in VictronConnect to meet the battery manufacturer requirements.
Connect an optional GX device through VE.Direct to monitor your system through the VRM portal. A compatible GX setup also supports coordinated charging through DVCC.
The adaptive charging algorithm adjusts absorption time to match discharge history. Bulk, absorption, float and storage stages help maintain the battery between trips.
Configurable input-voltage lockout helps protect the starter battery. Lithium low-temperature cutoff requires battery-temperature data shared by a compatible device, such as a SmartShunt or BMV-712.
The IP65-rated electronics enclosure resists dust and water exposure. Built-in overload, short-circuit and overheating protection helps safeguard the charger during everyday operation.
CONFIGURED FOR YOUR SYSTEM
Set input current limits to help prevent alternator overload. Adjust charging voltage for lithium, AGM, Gel and other battery chemistries. The Orion XS 1400 also supports 12V-to-24V and 24V-to-12V conversion for mixed-voltage systems.
CHARGING & INTEGRATION
ORION XS 1400 AT A GLANCE

VICTRON ORION XS 1400
Victron standard warranty · Terms apply
| Item | Value |
|---|---|
| Manufacturer / model | Victron Energy Orion XS 1400 · ORI242417040 |
| System voltages | 12V and 24V; same-voltage or mixed-voltage charging, configured during installation |
| Input operating range | 9–35V DC |
| Adjustable output range | 10–35V DC |
| Input / output current limits | 1–50A; independently configured |
| Voltage conversion | 12V to 24V and 24V to 12V supported. Available output current depends on input power, efficiency and configured limits. |
| Manufacturer power rating | Up to 1400W at 28V with sufficient input power and cooling; not a guaranteed 12V-to-24V output. |
| Maximum efficiency | 98.5% |
| Communications | Bluetooth / VictronConnect; VE.Direct; VE.Smart Networking |
| Operating temperature | −20°C to +60°C; output derating above 40°C |
| Protection rating | IP65 |
| Dimensions (H × W × D) | 138.1 × 124.4 × 53mm (5.44 × 4.9 × 2.1in) |
| Charger weight | 0.520kg (1.14lb); excludes packaging |
| Connections | Screw terminals; remote on/off terminal block |
Review the components pictured in the supplied kit. Your installer can confirm any additional accessories needed for your application.

Quantity: 1